Rectangular hollow section

Steel material EN 10210,EN 10219,Grade S355k2 square pipe,s355k2 square tube,S355K2+N steel pipe can be used in Retubing projects in ocean,power plant,offshore platforms,etc.

S355j2 rectangular pipe,s355j2 square tube,s355j2h square hollow section is one high tensile strength steel pipe with low temperature charpy impacting test.The equivalent steel grade to S355j2 rectangular pipe is Q355D rectangular pipe and Q355E rectangular steel pipe.

S275j0 rectangular tube,s275j2 square tube,s275jr rectangular tube stock with clear surface in our inner warehouse ready for shipment,the diameter range from 20*20-400*400mm and 20*40-400*600mm with welding and seamless typies.

Q355D rectangular hollow section,q355d square hollow section are structure steel pipes which can be used in low temperature surroundings,normally Q355D steel pipes can be replaced by S355J2 steel pipe.

Q355C rectangular pipe,q355c square hollow section,steel pipe Q355C is one low temperature impacting test steel pipe which can be used in low temperature belows 0 Degree centigrade.The equivalent grade to Q355C rectangular pipe is S355J0 rectangular pipe in European specification EN 10210.

Q355B rectangular hollow section,q355b square hollow section and Q355B steel pipe supplies from Chinese steel specification GB/T 3091,Old steel grade Q345B was replaced by grade Q355B.

A572 grade 50 rectangular pipe,a572 grade 50 square tube is a vanadium columbium alloy steel material which has an improved resistance to amtospheric corrosion used in outdoors and moist surroundings.

A500 grade a rectangular tube,a500 grade a square pipe with 100×100mm,80×80mm,120×120mm,150×150mm,180×180mm,200×200mm,250×250mm,280×280mm,300×300mm,350×350mm,pipe wall thickness range from 3 to 20mm stock in Xinsteel Industrial’s warehouse ready for shipment.

A36 carbon structure pipe includes ASTM A36 square hollow section,A36 rectangular hollow setion,A36 round pipe,A36 galvanized steel pipe,etc.BOILER FLUE GAS PIPE A36 with different shapes diameters in our stock ready for shipment.

EN 10219 specification S355J2H SHS is cold forming steel square hollow section used in low temperature ocean projects.These hollow tubes can be rolled in Normalized or thermomechanical rolling.

High tensile steel materials S355jr hollow pipe,S355J0 square hollow tube,S355J0H RHS can be supplying with classification society approcal with 3.2 material test certifiate.

EN 10210-1 specification hot rolled hollow section S355 series including S355JRH square hollow section,S355J2 square hollow section,S355K2H rectangular steel tube,S275NH square pipe,S355NH rectangular hollow section.

90 Degree right angle hollow section s355j2h,s275jr hollow pipe and s355j0h rectangular pipe stock in malaysian warehouse ready for shipment.Small quantity order can be accepted from our stock warehouse directly.

Cold formed welded and seamless carbon steel structural tubing a500 grade a square pipe,a500 grade b hollow pipe,a500 grade c hollow section stock with 100×100mm;150×150mm;200×200mm;250×250mm;100×150mm;120×80mm;200×150mm.

EN10210 s355j2h square pipe,s355j2h SHS,S355J2H square hollow section ex-stock in China supplies in hot finished with -20 Degree centigrade low temperature impact testing.EN 10210 S355JRH square pipe and S355J0H square pipe also stock in our warehouse.

Cold formed S355J2H RHS with dimension 200X120X6mm in specification EN 10219 which specified welded structural hollow sections of non-alloy and fine grain steels with or without heat treatment.

150X100X6mm 5mm 10mm size of S235JRH rectangular tube ex-stock can be rolling either with cold drawn according to specification EN 10219 or with hot finished as per specification EN 10210.

EN 10210 S275 S235 S355 SHS RHS hollow section in stock can be welding or seamless type with hot finished rolling.Non-alloy steel grades including JR,J0,J2,K2 and fine grain strucutral steel grades with NH and NLH.

S355j2h rectangular tube,s355j2h rectangular pipe can be supplied as either hot-finished or cold-formed.Hot finished S355j2h rectangular tube shall be rolling as per standard EN 10210 specification,Cold formed s355j2h rectangular pipe shall be rolling under specification EN 10219.

High quality Galvanized rect tube q235b,SS400 Galvanized RHS pipe,HDG rectangualr steel tube are delivery with Hot finished and cold drawn,then doing hot dipped galvanized on the rectangular tubes.

Galvanized square tube s235jr,galvanized steel square tube A36,HDG square steel tube is rolling from mild steel pipe and then coated zinc layer according to customers’ request.Galvanized square tube s235jr has a better chemical corrosion resistance than without galvanized coated tube.

S355j2h rectangular hollow section also knew as S355j2h rectangular hollow tube and S355j2h rectangular steel tube with seamless or welded type.16mm wall thickness S355J2H rectangular hollow section finished rolled and ready for packing and shipping out to Manila port this week.

Order QTY: 178 tons welded rectangular steel tube
Grade: EN 10210 S355J2H
Surface condition: Oiled

S235JRH rectangular tube is one carbon-maganese structural steel material with good strength and weldability.S235JRH rectangular tube contains carbon maximum 0.17 % for tube wall thickness equal and belows 40mm.If wall thickness above 40mm,the carbon contains can reach to 0.20 %.

S275J0H rectangular tube also named S275J0H rectangular hollow section and RHS S275J0H,S275J0H rectangular tube can supply as hot finished or cold formed.

Density: 7.85 kg/m3
Specification:EN 10210-2 EN 10219
Stock Size:DIA 5*40*40MM to 20*280*280MM
Stock Length:2 meter to 12 meter

EN 10210 S355J0H hollow section includes S355J0H square hollow section and S355J0H rectangular hollow section with EN 10204 3.1 mill certificates.

Supplies condition: Cold drawn or Hot finished
Stock quantity: 520 tons
MOQ: 1 piece

A500b rhs rectangular tube is one kind carbon rectangular hollow section in ASTM A500/A500M specification,there are A500a rhs,A500c rhs ans A500d rhs.

Stock size:2*30*30mm to 20*300*300mm
length:2 meter to 12 meter
MOQ: 1 PIECE

Hot finished Square hollow section S275JR,square tube S275JR,shs section S275JR supplies from european specification EN 10210-2 and EN 10210-1.

Density: 7.85 kg/m3
Stock dimension:2*20*20 to 25*300*300mm
Stock length:2-12 meter

Square tube S355J2 also called as square hollow section S355J2,the both sides length of tube are the same.Square tube S355J2 surface can be varnish,oil,hot dipped galvanized,shot blasting and painting or black.

Mill certificate:EN 10204 3.1 OR EN 10204 3.2 with ABS,BV,LR Class approval

Specification: EN 10210 AND EN 10219

S355J2 hollow section includes S355J2 rectangular hollow section and S355J2 square hollow section,S355J2 hollow section can be cold formed and hot finished.

Density: 7.85 kg/m3
Min. Yield strength 355 Mpa
Tensile strength:490-620 Mpa
Other relative grade:S235JR hollow section,S275JR hollow section,SM490 hollow section,S355JR hollow section