13CrMo4-5 STEEL PLATE

Our engineers suggest that for thickness belows and equal to 100mm,Normalized and Tempered heat treatment for 13CrMo4-5,13CrMo4-5 steel plate,13CrMo4-5 steel sheet,for thickness within 100-150mm,Normalized and Tempered or Quenched and Tempered are both ok,for thickness above 150mm,Quenched and Tempered are necessary.If resistance to pressurized hydrogen is of importance, a minimum content of 0,80% Cr may be agreed upon at the time of enquiry and order.

Technical Requirements & Additional Services for 13CrMo4-5 steel plate:
♦ High tension test
♦ Low temperature impacting test
♦ Simulated post-welded heat treatment (PWHT)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands 

►Mechnical property for 13CrMo4-5 steel plate:

Thickness(mm)	Yield strength (≥Mpa)	Tensile strength (Mpa)	Elongation in ≥,%
T≤16	300	450-600	19
16<T≤60	290
60<T≤100	270	440-590
100<T≤150	255	430-580
150<T	245	420-570

►Chemical composition for 13CrMo4-5 steel plate (Heat Analysis Max%)

Main chemical elements composition of 13CrMo4-5 steel plate
C	Si	Mn	P	S	N	Cr	Cu	Mo	Ni	Nb
0.08-0.18	0.35	0.40-1.00	0.025	0.010	0.012	0.70-1.15	030	0.40-0.60	0.40-0.80	0.015-0.045