S235J0 STEEL PLATE

Common carbon structural S235J0,S235J0 steel plate,S235J0 steel sheet rolling with the minimum yield strength at 235Mpa,and the tensile strength shall be within 360-510 Mpa.Low temperature impacting test shall be done under zero centigrade for structural steel plate S235J0.Normally Controlled rolled or Air rolled for steel plate S235J0 is ok,if customer demand,normalized is better for delivery of S235J0 steel plates.Xinsteel roll S235J0 completely according to standard EN 10025-2 and issued the original mill test certificate under Type EN 10204 3.1.

Technical Requirements & Additional Services for S235J0 steel plate:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
 

►Mechnical property for S235J0 steel plate:

Thickness (mm)
S235J0	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 80	> 80 ≤ 100	> 100 ≤ 150	> 150 ≤ 200	> 200 ≤ 250	> 250
Yield strength (≥Mpa)	235	225	215	215	215	195	185	175	175
	< 3	≥ 3 ≤ 100				> 100 ≤ 150	> 150 ≤ 250		> 250
Tensile strength (Mpa)	360-510	360-510				350-500	340-490		340-490

►Chemical composition for S235J0 steel plate (Ladle Analysis Max%)

Main chemical elements composition of S235J0 steel plate
Thickness(mm)	C	Si	Mn	P	S	N	Cu
T≤16	0.17	...	1.40	0.030	0.030	0.012	0.55
16<T≤40	0.17
40<T	0.17