St50-2 STEEL PLATE

DIN 17100 St50-2,St50-2 steel plate,St50-2 steel sheet is similar with the steel grade S355J2 under steel standard EN 10025-2.Xinsteel rolling St50-2,the maximum thickness can reach till 400mm now,for the thickness above 40mm of low alloy steel plate St50-2,normally our engineers recommend doing Normalized heat treatment for plate steel St50-2.For the unit weight above 16 tons,steel mill would roll steel plate St50-2 from steel ingots for guarantee the steel property.Steel specification St50-2,Steel grade St50-2 and Grade steel plate St50-2.

Technical Requirements & Additional Services for St50-2 steel plate:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands 

►Mechnical property for St50-2 steel plate:

Thickness (mm)
St50-2	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 80	> 80
Yield strength (≥Mpa)	295	285	275	265	255
	< 3	≥ 3 ≤ 100			> 100
Tensile strength (Mpa)	490-660	470-610			470-610

►Chemical composition for St50-2 steel plate (Product Analysis Max%)

Main chemical elements composition of St50-2 steel plate
C	Si	Mn	P	S	N
0.30	0.60	1.70	0.060	0.060	0.010