SM570 STEEL PLATE

In steel standard JIS G3106,SM570,SM570 steel plate,SM570 steel sheet owned the highest yield strength above 460 Mpa,and the tensile strength within 570-720 Mpa.Low temperature impacting test shall be done under minus 5 centigrade.Xinsteel Industrial offer hot rolled steel plate SM570 with thickness from 6mm-300mm,width from 1500mm-4000mm,length from 5000-16000mm.After finished rolling,the original mill test certificate would be issued by mill under format EN 10204 3.1,if our customers need the third party inspections,the MTC shall be issued under EN 10204 3.2 TYPE.

Technical Requirements & Additional Services for SM570 steel plate:
♦ Chemical Analysis
♦ Low temperature impacting test
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands 

►Mechnical property for SM570 steel plate:

Thickness (mm)
SM570	≤ 16	> 16 ≤ 40	> 40 ≤ 75	> 75 ≤ 100	> 100 ≤ 160	> 160
Yield strength (≥Mpa)	460	450	430	420	420	420
	≤ 100						> 100
Tensile strength (Mpa)	570-720						570-720

►Chemical composition for SM570 steel plate (Ladle Analysis Max%)

Main chemical elements composition of SM570 steel plate
Thickness(mm)	C	Si	Mn	P	S
T≤50	0.18	0.55	1.60	0.035	0.035
50<T