S460N ANGLE STEEL

EN10025-3 steel angles S460N shall be rolled according to the below table of chemical composition.The limits applicable for the product analysis of structural steel angles s460n are given in the below table. The manufacturer shall inform the purchaser at the time of the enquiry and order which of the alloying elements appropriate to the steel grade required will be deliberately added to the material to be delivered. The product analysis shall be carried out when specified at the time of the order.Normalized heat treatment should be done for steel angle bars S460N.

Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
 

►Mechnical property for S460N Structural steel angles:

Thickness (mm)
S460N	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 80	> 80 ≤ 100	> 100 ≤ 150	> 150 ≤ 200	> 200
Yield strength (≥Mpa)	460	440	430	410	400	380	370	370
	≤ 100					> 100 ≤ 200		> 200
Tensile strength (Mpa)	540-720					530-710		530-710

►Chemical composition for S460N Structural steel angles (Heat Analysis Max%)

Main chemical elements composition of S460N
C	Si	Mn	P	S	Nb	V
0.20	0.60	1.00-1.70	0.030	0.025	0.05	0.20
Al(total)	Ti	Cr	Ni	Mo	Cu	N
≥0.02	0.05	0.30	0.80	0.10	0.55	0.025