S275NL ANGLE STEEL

Low temperature impacting test under -50 centigrade shall be done for structural steel angle bars S275NL.Xinsteel keeps thousands tons hot rolled steel angles in EN 10025-3 specifications and ready for shipment.Equal angle steels EN 10025-3 S275NL,Un-equal angle steels EN 10025-3 S275NL,Inverted angle steels EN 10025-3 S275NL.

Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
 

►Mechnical property for S275NL Structural steel angles:

Thickness (mm)
S275NL	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 80	> 80 ≤ 100	> 100 ≤ 150	> 150 ≤ 200	> 200
Yield strength (≥Mpa)	275	265	255	245	235	225	215	205
	≤ 100					> 100 ≤ 200		> 200
Tensile strength (Mpa)	370-510					350-480		350-480

►Chemical composition for S275NL Structural steel angles (Heat Analysis Max%)

Main chemical elements composition of S275NL
C	Si	Mn	P	S	Nb	V
0.16	0.40	0.50-1.50	0.025	0.020	0.05	0.05
Al(total)	Ti	Cr	Ni	Mo	Cu	N
≥0.02	0.05	0.30	0.30	0.10	0.55	0.015