St60-2 ANGLE STEEL

High strength low alloy steel angle St60-2 owned the minimum yield point shall be above 335 Mpa and tensile strength shall be within 590-770 Mpa.Normlized St60-2 is mainly for steel angles for improve the steel property when rolling.Under steel standard Din 17100,there are different steel grades owning to the different yield strength and tensile strength as St37-2,St44-2,St44-3,St52-3,St50-2,St60-2 and St70-2.

Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands 

►Mechnical property for St60-2 Low alloy steel angles:

Thickness (mm)
St60-2	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 80	> 80
Yield strength (≥Mpa)	335	325	315	305	295
	< 3	≥ 3 ≤ 100			> 100
Tensile strength (Mpa)	590-770	570-710			570-710

►Chemical composition for St60-2 Low alloy steel angles (Product Analysis Max%)

Main chemical elements composition of St60-2
C	Si	Mn	P	S	N
0.40	0.60	1.70	0.060	0.060	0.010