+86 371 55057610 
inquiry@xsteelplate.com
■ Overview
Q460E high strength low alloy structural steel owned minimum tensile strength at 550 Mpa and minimum yield strength at 460 Mpa for thickness equal or belows 16 millimeters.When supplying Q460E,Q460E steel plate,Q460E steel sheet,the impact test shall be done at minus 40 centigrade.
■ Full Data
Technical Requirements & Additional Services for Q460E steel plate:
♦ Low temperature impacting test
♦ Cutting and welding as per end user’s demands
♦ More striction on some chemical elements contains
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Ultrasonic test under GB/T2970,JB4730,EN 10160,ASTM A435,A577,A578
♦ Low temperature impacting test
♦ Cutting and welding as per end user’s demands
♦ More striction on some chemical elements contains
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Ultrasonic test under GB/T2970,JB4730,EN 10160,ASTM A435,A577,A578
■ Techicals
►Mechnical property for Q460E low alloy structural steel:
| Thickness (mm) | ||||
| Q460E | ≤ 16 | > 16 ≤ 35 | > 35 ≤ 50 | >50 |
| Yield strength (≥Mpa) | 460 | 440 | 420 | 400 |
| Tensile strength (Mpa) | 550-720 | |||
►Chemical composition for Q460E low alloy structural steel (Heat Analysis Max%)
| Main chemical elements composition of Q460E | ||||||||||
| C | Si | Mn | P | S | V | Nb | Ti | Al (min.) | Cr | Ni |
| 0.20 | 0.55 | 1.00-1.70 | 0.025 | 0.025 | 0.02-0.20 | 0.015-0.060 | 0.02-0.20 | 0.015 | 0.70 | 0.70 |
Tel：+86 371 55057610 
Fax： +86 371 5505 7611