S355ML STEEL PLATE

TMCP S355ML,S355ML STEEL PLATE,S355ML STEEL SHEET under steel standard EN 10025-4.Structural Steel plate S355ML shall be done low temperature impacting test under minus 50 centi degree,and the minimum values of impact energy in J shall be above 27J on longitudinal V-notch test pieces for thermomechanical rolled steel plate S355ML,and the minimum values of impacting energy shall be above 16J on transverse V-notch test pieces for TMCP steel plate S355ML.If the end users need a specific high impact energy for steel plate S355ML when rolling,they should indicate this term in their POs.

Technical Requirements & Additional Services for S355ML steel plate:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands

►Mechnical property for S355ML steel plate:

Thickness (mm)
S355ML	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 80	> 80 ≤ 100	> 100
Yield strength (≥Mpa)	355	345	335	325	325	320
	≤ 40		> 40 ≤ 63	> 63 ≤ 80	> 80 ≤ 100	> 100
Tensile strength (Mpa)	470-630		450-610	440-600	440-600	430-590

►Chemical composition for S355ML steel plate (Heat Analysis Max%)

Main chemical elements composition of S355ML
C	Si	Mn	P	S	Nb	V
0.14	0.50	1.60	0.025	0.020	0.05	0.10
Al(total)	Ti	Cr	Ni	Mo	Cu	N
≥0.02	0.05	0.30	0.50	0.10	0.55	0.015