DNV Grade FH40,NV F40

The higher steel grade DNV Grade FH40,NV F40,DNV FH40 steel plate are used abnormally owning to its high cost and substitutability.For shipbuilding steel plate DNV Grade FH40,the standard rolling size is width of 2000mm and length 6000mm,considering the steel plates can be loaded into the twenty feet container,we suggest the end users to accept 5800mm,it would cost much ocean freight for them when transport.International purchase sizes always follow the feet sizes,after calculation,the most demands sizes for DNV Grade FH40 ship plates are normally 2438mm*9144mm or 1829mm*6096mm.

Technical Requirements & Additional Services for DNV FH40 steel plate:
♦ High tension test
♦ Z-Test (Z15,Z25,Z35)
♦ Low temperature impacting test
♦ Ultrasonic test under ASTM A435,A577,A578
♦ Cetificated by ABS,LR,GL,BV,DNV,KR,NK,CCS,RINA
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands 

►Mechnical property for DNV Grade FH40 shipbuilding plate:

Yield strength (≥Mpa)	Tensile strength (Mpa)	Elongation in ≥,%
390	510-650	200mm	50mm
		19	22

►Chemical composition for DNV Grade FH40 ship plate (Heat Analysis Max%)

Main chemical elements composition of DNV Grade FH40
C	Si	Mn	P	S	Al (acid) min.	Nb
0.16	0.50	0.90-1.60	0.025	0.025	0.015	0.02-0.05
V	Ti	Cu	Cr	Ni	Mo	N
0.03-0.10	0.02	0.35	0.20	0.80	0.08	0.009